Configuring video reference standard settings

The video reference standard setting is global to the K2 Summit/Solo system and applies to all channels. For the reference standard currently selected, the only clips available for playout are those that use that reference standard. Clips that use a different reference standard are disabled (grayed out).

Note: When you change the video reference standard setting, a restart is required to put the change into effect.
  1. In AppCenter, open the Configuration Manager.
  2. Click System.
  3. Configure settings as follows:
    For this setting... Configure as needed...
    Reference Standard Choose NTSC or PAL.
    Determine status of Reference present.
    • Green LED — source present
    • Black LED — source not present
    Determine status of Reference locked.
    • Green LED — system locked
    • Black LED — system not locked

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32