Configuring MXF Export Type on a K2 SAN system

  1. In the K2Config application, for the K2 Media Server with role of FTP server, access the FTP Server Configuration page as follows:
    • On a SAN that is already configured, in the tree view click FTP Server.
    • On a SAN that is not yet fully configured, work through the Configure K2 Server wizard until you reach the FTP Server Configuration page.
  2. On the FTP Server Configuration page select one of the following:
    • 377M: SMPTE ST 377:2004 compliant. Ensures compatibility with older products.
    • 377-1: SMPTE ST 377-1:2009 compliant.
  3. Manage the required K2 Media Server restart as follows:
    • On a SAN that is already configured, you must restart the K2 Media Server to put the change into effect. Follow the restart procedure appropriate for the basic or redundant K2 SAN.
    • On a SAN that is not yet fully configured, continue to work through the Configure K2 Server wizard. The restart at the end of the configuration process is sufficient.

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32