LTC connectors pinouts

The K2 Summit/Solo system LTC panel connector provides balanced linear timecode input and output connections. The interface conforms to SMTPE 12M Linear Timecode.

On the K2 Summit/Solo system there is one 6 pin Switchcraft TRA6M Mini-XLR male connector for each channel. Pinouts are as follows:



Pin # Signal Description
1 IN_P<0>
2 IN_N<0>
3 GND Frame Ground
4 OUT_P<0>
5 OUT_N<0>
6 GND Frame Ground

The mini-XLR to XLR LTC cable has connections as follows:




Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32