Adding stand-alone K2 clients to the system description

  • The system description must contain a group.
  1. In the Network Configuration | Devices tree view, right-click a group and select Add Device.



  2. Configure settings for the device you are adding as follows:
    • Family – Select K2.
    • Type – Select the appropriate type of K2 system.
    • Model – Select the model with the appropriate storage.
    • Name – This is the device name, as displayed in the SiteConfig device tree view and device list view. This name can be different than the host name (network name). You can accept the default name or enter a name of your choice. Devices in the tree view are sorted alphabetically.
    • Amount – You can add multiple devices, as currently defined by your settings in the Add Device dialog box. An enumerator is added to the name to create a unique name for each device added.
    • Control network– Select the control network.
    • Starting Address – Select from the list of available addresses on the selected control network. If adding multiple devices, this is the starting address, with addresses assigned sequentially to each device added.
  3. Click OK to save settings and close.
  4. Repeat these steps for each of your stand-alone K2 clients.

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32