Modifying the FTP/streaming network

  1. In the Network Configuration | Networks tree view, select the K2 SAN's Site node. The networks under that node are displayed in the list view.
  2. Proceed as follows:
    • In the list view, right-click the Streaming network and select Details.

    The Network Settings dialog box opens.



  3. Configure the settings for the network as follows:
    Setting... For FTP/streaming network
    Type Ethernet is required
    Usage FileTransfer is required
    Redundancy None is required. This is true even on a redundant K2 SAN. (Only the iSCSI network is redundant on a redundant K2 SAN.)
    Name Streaming is recommended
    Exclude from Host Files Unselected is required
    Managed Selected is required
    Base IP Address The first (lowest) IP address in the range of IP addresses managed by SiteConfig. Required.
    Number of Addresses The number of IP addresses in the range managed by SiteConfig. Required.
    Subnet Mask The network's subnet mask. Required.
    Gateway IP Address Additional network settings managed by SiteConfig. Allowed.
    Unmanaged Unselected is required. Related settings are disabled.
    DNS Servers Servers providing DNS for name resolution. Allowed.
    Default Interface Name Suffix _he0 is required
  4. Click OK to save settings and close.

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32