Configure live streaming multicast

This task describes using AppCenter to configure multicast settings.

  1. In AppCenter, click File | System | Configuration. Configuration Manager opens.
  2. In Configuration Manager, click the System tab. These setting apply to all channels on the K2 Summit system.
  3. In Proxy Setup settings, select the multicast IP base. The K2 Summit system applies channel-specific IP addresses from this base. Your choices are constrained to those specified by IANA for multicast.
  4. Select the multicast port base. This is the first UDP port address for elementary streams.
  5. Click OK to apply the settings.
Parent topic: Configuring proxy and live streaming settings

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32