Adding a cue point while recording

Note: While the clip is record mode, do not use the transport controls.
  1. Select Player/Recorder from the application drop-down list.
  2. Begin recording.
  3. In the Record pane, click on the Cue tab. The Cue view displays.
  4. Do one of the following:
    • Click the Add Cue button.
    • Select Control | Add Cue.

    A cue point is added to the cue list using a unique name, e.g. Cue_1.


Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32