Using Fixed Length record mode

You can specify the clip length before recording, or during recording. As long as there is sufficient storage space, a fixed length recording continues until the clip length is reached or until you select stop.

  1. Verify video, audio, and other settings for your recording.
  2. Select Length in the Recorder pane.



    The Length dialog box appears.

  3. Enter the clip length by typing only numbers, colons are added automatically.
  4. Choose OK in the dialog box, or press Enter.
  5. Select the record button on the onscreen transport controls.
Recording continues until Stop is selected or the desired length is reached. While recording, the mark in and mark out update with the current status of the clip. The Time Dome gives a visual indication of the percent complete as well as a countdown from the specified length down to 00:00:00:00.

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32