Recommended recovery process

The recommended recovery disk image process is summarized in the following steps.

At the K2 Media Server first birthday...

  1. Boot from the Recovery CD.
  2. Create a set of disk image recovery CDs. These CDs contain the C:, D:, and E: partitions.
  3. Create a disk image, writing the disk image to the E: partition. This disk image contains the C: and D: partitions.
  4. Copy the disk image from the E: partition to another location, such as a network drive.

At milestones, such as after software upgradesā€¦

  1. Boot from the Recovery CD.
  2. Create a disk image, writing the disk image to the E: partition. This disk image contains the C: and D: partitions.
  3. Copy the disk image from the E: partition to another location, such as a network drive.

If you need to restore the K2 Media Serverā€¦

  1. Boot from the Recovery CD.
  2. If the E: partition is accessible, read the image from the E: partition to restore the C: partition, restore the D: partition, or restore both partitions.
  3. If the E: partition is not accessible, do the following:
    1. Read the disk image from your set of CDs and restore all three partitions
    2. Restart into Windows.
    3. Copy your most recent disk image to the E: partition.
    4. Boot from the Recovery CD.
    5. Read the image from the E: partition to restore the C: partition, restore the D: partition, or restore both partitions.

Plan a recovery strategy that is appropriate for your facility, then refer to procedures as necessary to implement your strategy.


Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32