Verify adapter names

  1. If not already open, open Network Connections as follows:
    1. Open the Windows Network and Sharing Center control panel.
    2. Click Change Adapter Settings. Network Connections opens.
  2. In Network Connections, click View | Details.
  3. Verify adapter names.
    • On a Dell R620 or R610 system with four 1 Gig adapters only, the required names are specified as follows:
      Adapter name
      Control Connection
      FTP-Streaming Connection
      Unused Connection 1
      Unused Connection 2
    • On a Dell R620 system with two 1 Gig adapters and two 10 Gig adapters, the required adapter names are specified as follows:
      Adapter name
      Control Connection
      Unused Connection 1
      FTP-Streaming Connection
      Unused Connection 2
    • On a Dell R610 system with a 10 Gig network interface card installed, the required adapter names are specified as follows:
      Adapter name
      Control Connection
      Unused Connection 0
      Unused Connection 1
      Unused Connection 2
      FTP 10G Connection

      The 10 Gig network interface adapter is named FTP 10G Connection. If it has dual-ports, the other connection is named Unused Connection 3 10G.

  4. Proceed as follows:
    • If all the names on this system are configured correctly to locations, skip the rest of this procedure.
    • If names on this system are not configured correctly, for each adapter name incorrectly configured, complete the remaining steps of this procedure.
  5. Select the name in the Name column.
  6. Select File | Rename to enter rename mode.
  7. Type the name required.

Next, reorder adapters.


Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32