MXF Export Type

When importing and exporting MXF the K2 system behaves as follows, in relation to the MXF Export Type setting in K2Config or in K2 AppCenter:

• The MXF Export Type setting applies to all MXF exports on the K2 system. There is one setting for one K2 system. The K2 system can be a stand-alone K2 Summit/Solo system or a K2 SAN. If a K2 SAN, the one setting applies to the K2 Media Server with role of FTP server that handles exports for all SAN-attached K2 Summit systems.
• For export, the K2 system must be set to one of the following MXF Export Types:
  • 377M: SMPTE ST 377:2004 compliant. Ensures compatibility with older products.
  • 377-1: SMPTE ST 377-1:2009 compliant.
• By default the K2 system is set to SMPTE ST 377:2004. This setting is only applicable to the MXF op1a import and export.
• The SMPTE ST 377:2004 setting is recommended for compatibility with older systems which do not support SMPTE ST 377-1:2009.
• The following format does not support SMPTE ST 377-1:2009 export. Therefore the format is always exported as SMPTE ST 377:2004, regardless of the MXF Export Type setting:
  • D10 media
• For import, both SMPTE ST 377:2004 and SMPTE ST 377-1:2009 are supported, regardless of the MXF Export Type setting. The MXF Export Type setting affects export only.