Shutdown/restart problems

If the K2 Summit system is inoperable due to an error it can affect the operation of the standby button. If pressing the standby button does not shut down the K2 Summit system, press and hold the button for five seconds. This forces the K2 Summit system to execute a hard power down. If that doesn't work or if after the hard power down the system does not boot, disconnect then reconnect the power cable(s).

The K2 Summit system is set to attempt to boot from a USB drive first, before it boots from the boot media card. If you have a drive connected to a USB port that does not contain an appropriate operating system and you start up the K2 Summit system, an error message is displayed and the boot up process halts.


Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32