Configuring a channel suite

You need to configure the channel suite before you can use it. To configure a channel suite, specify the K2 source that you want to use and add its channels to a channel suite. You can add channels from several sources to one channel suite, with a maximum of 16 channels in one channel suite.

  1. At the blank Suite Properties dialog box, click the Add button. An Add Channel dialog box displays.
  2. Enter the K2 Summit/Solo system host name or IP address.
  3. Click OK. A second Add Channel dialog box displays, listing the channels on the specified K2 Summit/Solo system.
  4. Select the channels you want in your channel suite and click OK.
  5. Review the changes you have made to the Suite Properties dialog box and click OK.
Once you have saved the changes to the channel suite, you can modify the channel suiteā€™s name and location or rename or reorganize the channels. Descriptive channel names are especially helpful when using a channel suite with channels from multiple sources.

Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32