Other Topic Library Versions

Storage and domain requirements for SMB storage

The K2 Summit system on SMB storage must be created with the following requirements for hi-res and lo-res CFIS locations and domain.

  • One private share:
    • Private Media Share: This is a high-resolution realtime network. This network must be segmented, non-routable, and private. For example purposes in these topics, this share is represented by the following:

      \\gvstorage-private\mediashare

  • Two public shares:
    • Public Media Share: This is a high-resolution non-realtime network. For example purposes in these topics, this share is represented by the following:

      \\gvstorage-public\mediashare

    • Public Proxy Share: This is a low-resolution network. For example purposes in these topics, this share is represented by the following:

      \\gvstorage-public\proxyshare

      There should only be one proxy location used throughout the system.

  • Besides configuring the Control Network, the following servers might require a special network adapter to connect to the SMB storage:
    • HTTP Proxy Server
    • Conform, Encoder, Render Engine, and XRE server(s)
    • FSM/K2 Manager
    • K2 Summit Clients systems
  • The system must be on a fully qualified domain.

For details about configuring a specific brand of SMB storage to support K2 Summit systems, refer to the Grass Valley Knowledge Base.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46