Other Topic Library Versions

Domain SiteConfig setup for software installation and upgrades

Before deploying software, you must ensure that the internal system/domain account is configured in deployment options. Failure to do so can result in the software installation process changing the internal system/domain account back to the default account. Once deployment options are configured, they are retained for future deployment sessions.
  1. Follow steps for a normal GV STRATUS/Summit system, but with the following steps to ensure that the internal system/domain account is configured in deployment options.
  2. In the Software Deployment | Deployment Groups tree view, select a deployment group.
  3. In the Tasks list view, view tasks and determine if you must set deployment options. Tasks that need to have deployment options set display in the Details column a message stating "Deployment options required." If you select a task that needs to have its deployment options set, the Start Deployment button is disabled and the message is displayed next to the button.
  4. Do one of the following to set deployment options:
    • Double-click the task.
    • Select the task and click the Options button.
    A wizard opens.
  5. For the following install packages that require a services account, work through wizards and use the internal system/domain account.
    Software Deployment options

      GrassValley_STRATUS_ConformService

      GrassValley_STRATUS_CoreServices

      GrassValley_STRATUS_DataMover

      GrassValley_STRATUS_DIVA_MDI

      GrassValley_STRATUS_FlashNet_MDI

      GrassValley_STRATUS_Masstech_MDI

      GrassValley_STRATUS_GFTP_MDI

      GrassValley_STRATUS_HttpProxyServer

      GrassValley_STRATUS_MediaFlow

      GrassValley_STRATUS_MEWS

      GrassValley_STRATUS_Proxy_Encoder

      GrassValley_STRATUS_RenderEngine

      GrassValley_STRATUS_Rules

      GrassValley_STRATUS_Summit_MDI

      GrassValley_STRATUS_TrafficGateway

      GrassValley_STRATUS_Transcode



  6. If you have multiple devices of the same type, you can enter deployment options for one of them using the wizard. Then, when you bring up the same wizard on every device, you can choose the Use options from radio button and select the first device for which you set options. SiteConfig copies the options you set for the first device and fills in the blanks on the wizard.
  7. Install software via SiteConfig as you would for a standard GV STRATUS/Summit system.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46