GV STRATUS Control Panel configuration for SMB storage

Before configuring GV STRATUS Control Panel:

The entire system must be restarted in the following order so that the registry settings take effect:
- K2 systems
- All other servers
GV STRATUS servers and K2 Summit systems must be licensed. License K2-NASCONNECT is required.
K2 Summit system channels must be configured.

Configure Control Panel as you would a normal GV STRATUS system, except for the following steps.
In some fields you must manually enter text rather than selecting from a list.
Select Core | ProxyConfig | Proxy Settings and do the following:
1. Set the Location of Proxy Assets and CIFS Server to the Public Proxy share, such as \\gvstorage-public\proxyshare.
2. Enable proxy Creation to set the proxy registry keys on the Summit clients.
3. Enable Proxy Encoders for auto-scavenging.
4. Save and Test Connections.
Select Core | K2 Storage | Third Party Storage and set the Storage Server (UNC) to the Public Media share, such as \\gvstorage-public\mediashare .

The conform service will map to this location.
Mount the SMB storage Public Media Share, such as \\gvstorage-public\mediashare, as the V: drive on the hi-res PC.
You can also mount the removable media to the PC.
Shut down the entire system.
Power up in the following order:
- FSM/K2 Manager (Log in before powering up Summit clients.)
- K2 Summit systems (Verify AppCenter is functioning on each client before powering up other servers.)
- All other servers.