Other Topic Library Versions

Configure Macintosh systems for control network

Depending on the version of your Macintosh operating system, the steps in this task can vary. Refer to your Macintosh documentation as necessary.

Configure each Macintosh system as follows:

  1. Open System Preferences, Network settings.
  2. Set Ethernet 1 to configure manually (static IP).
  3. Configure IP address, subnet mask, and other settings as required for the control network.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46