Other Topic Library Versions

Network setup and implementation checklist

Task Instructions Comment
Import or create the SiteConfig system description on the control point PC Importing a system description Select IP address range for each network and each device type.
Modify names and networks in the SiteConfig system description. Modifying a device name, Modifying the control network, Modifying the FTP/streaming network, Modifying a media (iSCSI) network Set subnet mask and other settings.
Verify/modify device interfaces Modifying K2 client unassigned (unmanaged) interface, Modifying K2 Media Server unassigned (unmanaged) interface Do not proceed until the system description accurately represents all aspects of the actual system. Refer to SiteConfig Help Topics . Use procedures as appropriate for your site.
Discover devices Discovering devices with SiteConfig
Assign placeholder devices to discovered devices Assigning discovered devices
Configure IP settings of network interfaces on discovered devices Modifying K2 client managed network interfaces, Modifying K2 Media Server managed network interfaces
Configure names Making the host name the same as the device name
Validate networks Pinging devices from the PC that hosts SiteConfig
Distribute host table information Generating host tables using SiteConfig
Next: Software update checklist

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46