Other Topic Library Versions

Check the V: drive

  • The K2 Media Server must be configured
  • The restart of the K2 Media Server after it is configured must be complete

This task is required for NAS server functionality.

  1. Verify that the K2 Media Server has restarted by opening the MS-DOS command prompt and use the “ping” command.
  2. In the K2Config application tree view, under the K2 Media Server select the File System Server node.

    The File System Server Configuration page appears.
  3. Click Check and verify that the V: drive is shared.
Proceed as follows:
  • If you have NH servers, configure them next.
  • If you do not have NH servers, configure K2 clients and/or other iSCSI clients on the K2 SAN next.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46