Other Topic Library Versions

Importing a SiteConfig system description into K2Config

You can import a SiteConfig system description that contains a K2 SAN into the K2Config application. You should do this only after the K2 SAN is fully complete and implemented in SiteConfig, as changes are not automatically synchronized between SiteConfig and K2Config after the import.

When you import a SiteConfig system description, K2Config identifies your SAN devices, defines the SAN, and displays the unconfigured SAN in the tree view. Therefore you do not need to define the K2 SAN in K2Config. You can skip this task and instead begin your work in K2Config by configuring the first K2 Media Server.

  1. In the K2Config application, click File | Import SiteConfig.
  2. Browse to and select the system configuration file. A K2 System Information dialog box opens.

  3. In the drop-down list, select the type of K2 SAN that you are importing.
  4. If a redundant K2 SAN, select “…failover capabilities…”
  5. Click OK.
  6. The SAN appears in the K2Config application.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46