Other Topic Library Versions

Configure Database Client Configuration page - K2 client



This page connects the SAN client as a media database client to the K2 Media Server taking the role of metadata (database) server. If there are redundant K2 Media Servers, both are listed on this page as database servers.

  1. Verify that the K2 client is connecting to the correct K2 Media Server or Servers, as follows:
    • For a basic (non-redundant) K2 SAN, the client connects to the only server.
    • For a redundant K2 SAN, the client connects to server A as database server 1 and server B as database server 2.
    If there are multiple FTP servers (such as the optional NH servers), the K2Config application automatically assigns the SAN client to an FTP server to provide optimum FTP bandwidth across the system. Do not attempt to change the assignment to a different FTP server while you are doing this initial configuration.
  2. Click Check.
  3. When the wizard reports that the configuration check is successful, click Next.

The iSCSI Initiator Configuration page opens.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46