Other Topic Library Versions

Codec board problems

Investigate the problem further as described in the following table. If the problem persists, contact Grass Valley Support.
Problem Possible Causes Corrective Actions
A system status message indicates a problem with the codec board. The codec module is not connected properly or is faulty. Check the codec board indicator (LED) on the rear panel. Visually inspect codec module. Make sure it is connected properly and there is no sign of physical damage. Restart the K2 Summit system. If the problem persists, replace the codec module.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46