Other Topic Library Versions

Configuring channel ganging

Channels must assigned to a gang using the Ganging tab in the Configuration Manager.

  1. In AppCenter, select the Player/Recorder application in the channel pane.
  2. Select System then Configuration and click on the Ganging tab.
  3. Assign the channels to a gang, and check the appropriate boxes. For a description of the configuration choices, see “Components of the channel ganging configuration” on page174.
  4. To save changes, do one of the following:
    • To apply changes to the current configuration file, click OK.
    • To save the changes in a new configuration file, click Save, to save the configuration file, then click OK.
    If the Record/play same clip on all channels of Gang box has been checked, the channel pane label switches to G1 or G2 in the first channel in the gang. The other channels in the gang display “In Use” in the channel pane and “Gang” in the application drop-down list.
Note: You cannot remove a channel from a gang by setting the channel application to <none>. To remove a channel from a gang, change the channel’s ganging assignment in Configuration Manager.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.4 gvtp_20150218_00:14:46