Other Topic Library Versions

Install software using SiteConfig

  1. Find SNFS software, K2 software, and a PDF file with instructions from the "About This Release" section of the K2 Topic Library on the USB Recovery Flash Drive that you received with the upgrade kit.
  2. If you have reimaged 32-bit Windows XP K2 Summit system so that it is now a 64-bit Windows 7 system, do the following:
    1. Remove the K2 Summit system from the SiteConfig system descriptions.
    2. Add the K2 Summit system as a 64-bit system to the SiteConfig system description.
    SiteConfig generates an "RPES Service Error 2" if you do not do this step.
  3. Use your normal methodology with SiteConfig to install the following software:
    • SNFS software
    • K2 system software
    Note: When checking software, if an "Unable to copy ... to target" error appears for a device that has Grass Valley Embedded Security, put Embedded Security in Update mode.

Next, restore licensing.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14