Other Topic Library Versions

GPI Output

On the GPI tab, select GPI-Output… Make settings as needed…
GPI Output 1. . . GPI Output 12 Channel C1, C2, C3, C4 Select the channel on which to trigger the GPI Output.
GPI Output 1. . . GPI Output 12 Active High

Low

Select the active signal (high or low) required. This is determined by the external equipment connected to the GPI Output.
GPI Output 1. . . GPI Output 12 Control

(This menu and the items on it are part of the licensable AppCenter Pro option)

Application

Position trigger

Channel state

Determines whether the GPI output is triggered by the application (e.g., by the Properties dialog box in Playlist), the position (e.g. at the beginning or end of a clip) or the state of the selected channel (e.g. playing, recording, idle, etc.)
GPI Output 1. . . GPI Output 12 Trigger name

(Available when Application selected)

GPI-Out-X Enter the name of the action triggered by the GPI output.
GPI Output 1. . . GPI Output 12 Trigger at (Available when Position trigger selected) Start of material

End of material

Start of material plus

End of material minus

When Start/End of material plus/minus offset appears
GPI Output 1. . . GPI Output 12 Activate when

(Available when Channel state selected)

Playing

Recording

Cued for play

Cued for record

Idle

Once a channel has been selected, this setting triggers the GPI output when the channel is in the specified state.
Note: If you want to play a list that was created on another play channel, you must ensure that GPI triggers assigned to the play channels use the same names; otherwise the GPI triggers will not occur. Using identical GPI names also allows copying and pasting sections and events between lists.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14