Other Topic Library Versions

If primary upgrade only is complete

If you have completed the upgrade to the primary server but you have not yet upgraded the backup server, do the following:

  1. Make sure the backup server is still shut down.
  2. Put the primary server in service as follows:
    1. On the primary server, run Server Control Panel. You can do this at the local server or through the K2 System Configuration application.
    2. Use the Start button on Server Control Panel. This makes the primary server qualified to take the role of media file system/database server.
    3. Make sure that Server Control Panel shows green LEDs and that the server on which you have upgraded software is indeed the current primary server.
  3. Power up the backup server. Wait until startup processes complete before continuing. The Failover Monitor should currently be off, as this is the normal state of the service at system startup.

Next upgrade the backup server. Perform all K2 Media Server upgrade tasks on the backup server.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14