Other Topic Library Versions

Adding an Ethernet switch

  • You must be logged in to the K2 System Configuration application with permissions equivalent to K2 administrator or higher.
  • The devices of the K2 SAN do not need to be offline, and there is no restart of devices required.
  1. In SiteConfig, add the switch to the appropriate group.
  2. In the K2 System Configuration application tree view, select the name of the K2 SAN, which is the top node of the storage system tree.
  3. Click Add Device. The Add Device dialog box opens.
  4. Select Ethernet Switch.
  5. Click OK. The new switch appears in the tree view.
  6. Configure the switch as appropriate.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14