Other Topic Library Versions

Check the V: drive

  • The K2 Media Server must be configured
  • The restart of the K2 Media Server after it is configured must be complete

This task is required for NAS server functionality.

  1. Verify that the K2 Media Server has restarted by opening the MS-DOS command prompt and use the “ping” command.
  2. In the K2Config application tree view, under the K2 Media Server select the File System Server node.

    The File System Server Configuration page appears.
  3. Click Check and verify that the V: drive is shared.

The K2 Nearline SAN configuration is complete.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14