Other Topic Library Versions

Configuring NH server B

  • Server A must be configured
  • The restart of server A after it is configured must be complete

On nearline systems, both NH K2 Media Servers are identical, with the exception that only one server can be the active media file system server at any time. For this reason the K2Config application embeds the configuration and start of the media file system into the wizard when you configure the first NH K2 Media Server, as in the previous procedure. That server is now the acting media file system server. You can now configure the remaining server using the following procedure.

  1. Verify that server A has restarted by opening the MS-DOS command prompt and use the “ping” command.
  2. In the K2 System Configuration application tree view, select the K2 Media Server you are configuring as server B.
  3. Click the Configure button.

The Configure K2 Server wizard opens to the Define server roles page.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14