Other Topic Library Versions

Configure File System Server Configuration page - NH server

  • Network and SNMP must be settings configured
  • Disks must be bound
  • A new file system must be made



This page checks on the file system server role. The server also functions as a file system client, which is also checked from this page.

  1. In K2Config open the server's File System Server Configuration page, if the page is not already open.
  2. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is usually not configured for RVIO.
  3. Click Check.
  4. When the wizard reports that the configuration is correct, click Next. If you get a “The V: will not be available until this device is rebooted…” message, you can safely continue now and reboot later when instructed to do so.

The FTP Server Configuration page opens.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14