Other Topic Library Versions

Configure File System Server Configuration page - Redundant K2 SAN server A

  • Network and SNMP settings must be configured
  • Disks must be bound
  • There must be a new file system



This page checks on the configuration of the K2 Media Server in one of its main roles as a file system server. The K2 Media Server also functions as a file system client, which is also checked from this page.

  1. In Storage Utility open the server's File System Server Configuration page, if the page is not already open.
  2. If you have not already done so, enter the name or IP address of the redundant K2 Media Server (server B).
  3. If desired, configure reference file generation.
  4. Click Check.
  5. When the wizard reports that the configuration is correct, click Next. If you get a “The V: will not be available until this device is rebooted…” message, you can safely continue now and reboot later when instructed to do so.

The iSCSI Bridge Server Configuration page opens.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14