Other Topic Library Versions

Reorder adapters

  • Adapters must be named correctly
  • The control team must be created
  • The team and loopback must be named
  1. Open Network Connections, if it is not already open.
    1. From the Windows Start menu, in the Run or the Search programs and files box, type ncpa.cpl and press Enter.
    The Network Connections window opens.
  2. Select Advanced, then Advanced Settingsā€¦
  3. On the Adapters and Bindings tab, depending on the K2 system storage, order adapters as follows:
    Internal or direct-connect storage Shared (SAN) storage
    Loopback Control Team
    Control Team Control Connection #1
    Control Connection #1 Control Connection #2
    Control Connection #2 Media Connection #1
    Media Connection #1 Media Connection #2
    Media Connection #2 Loopback
    1394 Connection 1394 Connection
    If controlled by Dyno Production Assistant, refer to Dyno PA documentation for adapter order.
  4. Click OK to close and accept the changes.
  5. Close Network Connections.
Network configuration is complete.

Next, enhance network bandwidth.


Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14