Other Topic Library Versions

Unbind LUN

With internal storage, you can only unbind one LUN at a time. Also make sure the controller is not busy with other processes, such as rebuilding a disk. If the controller is busy, the unbind LUN operation fails.

CAUTION:
Unbinding destroys all data stored on disk modules.

Refer to topics about direct-connect external storage before using this procedure on direct-connect systems.

  1. In the tree view, right-click the LUN and select Unbind LUN.
  2. If online, messages appear “…offline mode now?” and “…continue?”. Click Yes to put the system in offline mode. AppCenter channels go offline.
  3. When warning messages appear “…destroy all existing media…” and “Are you sure?”, click OK to continue.
  4. The Progress Report opens and displays unbind progress.

  5. When progress reports 100% complete, the LUN is unbound.
  6. Restart the K2 system.
Note: On the K2 Media Client, remember that the LUN 0 (disks 0_0 and 0_1) is the system drive. Do not attempt disk operations on the system drive.

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. K2 Summit 9.5 gvtp_20151106_14:27:14