Other Topic Library Versions

Install K2 Central software

  1. Ensure you are logged in as Administrator.
  2. Insert the K2Central USB drive.
  3. Install SNFS 4.7.2. Note: A reboot is necessary to allow SNFS to completely install and it must be done before installing other software.
  4. Remove the K2Central USB drive.
  5. Restart the system.
  6. Insert the K2Central USB drive.
  7. Install the 9.5 software. Do not restart or shutdown at this time.
  8. Navigate to the Grass Valley Apps. Open Embedded Security Manager

  9. In Embedded Security Manager to the right of Solidify Current Files select Solidify. This will take many minutes to do and messages will display in the lower Manager Output Window. When new messages stop appearing after the C:, D:, E: and P: drives are listed then the Solidify step is complete.
  10. In Embedded Security Manager to the right of Update Mode select Leave. This will cause some actions to be displayed in the lower Manager Output Window. When complete, the Embedded Security Status at the upper left of the dialog will show green Enabled for Current Status and Status after Reboot.
  11. Close the Embedded Security Manager application.

  12. Shutdown and turn off the power to the system.
  13. Remove the K2Central USB drive.
  14. Reinsert the media drives.
Parent topic: Reimaging a K2 Central TX Server

Copyright © 2016 Grass Valley Canada. All rights reserved. K2 Summit 9.6 gvtp_20160520_13:06:36