Cable Macintosh systems

Connect each Macintosh system as follows. If you have multiple Macintosh systems and a redundant K2 SAN, balance Macintosh systems between A and B switches. Refer to the K2 SAN Installation and Service Manual for more information about SAN connections.

Connect GigE port 1 to a control port on the Ethernet switch.
Do one of the following:
- If iSCSI access, connect GigE port 2 to a media port on the K2 SAN Ethernet switch. This connection is for the media (iSCSI) network.
- If Fibre Channel access, connect the Fibre Channel port to the K2 SAN Fibre Channel switch or to a Fibre Channel port on the K2 RAID controller.