Other Topic Library Versions

Installing software and CPU carrier module upgrades

Tools and materials needed:
  • Hardware as provided by upgrade kit. See descriptions below.
  • Torx tool with T15 magnetic tip
This section provides instructions for the following field kits:
Upgrade Nomenclature Description
K2-XDP2-CPU-FK Processor upgrade Field Kit. Includes updated Type IV CPU carrier module required for advanced features such as ShareFlex. NOT AVAILABLE for K2-SOLO models.
K2-XDP2-V9-FK K2 Summit / K2 Solo 9.x Upgrade Field Kit. Includes 9.x system software license, 16GB CompactFlash system drive with image, and 16GB USB recovery flash drive with Acronis backup software and new Windows Embedded System 7 license with Embedded Security Solution. Requires either Type II, Type III, or Type IV CPU carrier module.

For any upgrade from a software version lower than 9.0 to a 9.x version, you must reimage the system and do all the steps as directed in the procedure to ensure the system is properly initialized.

CAUTION:
This system contains board-level components that must be protected from static discharge and physical shock. Wear a wrist strap grounded to the system chassis when handling system components.
Work through the tasks in this section sequentially.

Copyright © 2016 Grass Valley Canada. All rights reserved. K2 Summit 9.6 gvtp_20160520_13:06:36