Enable proxy files

In AppCenter, click File | System | Configuration. Configuration Manager opens.

In Configuration Manager, click the Channel tab.

Select a channel.

In Proxy Setup settings, set Record proxy files to Yes.

This setting and the Live network streaming setting are related to DynoZoom and live monitoring. Refer to related topics in the "Configuring the K2 System" section of this Topic Library.

Select the audio included in the proxy file as follows:

Select the first audio input pair to include in the proxy file.
Select the number of audio inputs to include in the proxy file.

The K2 Summit system includes audio pairs beginning with the first pair selected and then each subsequent audio pair up to the selected number of audio inputs.

If you want to the K2 Summit system to automatically detect scene changes and include them in the proxy file, do the following:

Set Detect scenes to Yes.
Select a minimum scene length. This is the length of time the K2 Summit/Solo system waits after detecting a scene change to begin attempting to detect the next scene change.

Select the Stream bitrate for the proxy as follows:

4 Mbps — High bitrate for higher streaming proxy quality.
1 Mbps — Low bitrate to optimize the speed of streaming proxy.

Note: Stream bitrate of 8 Mbps does not work for proxy files.

Select another channel and configure as desired.

Click OK to apply the settings.