Configure iSCSI Bridge Server Configuration page - Redundant K2 SAN server B

This page manages the components that bridge between iSCSI (the GigE media network) and the Fibre Channel connection to the RAID storage. You configure network settings on the iSCSI adapters and the page validates that the Fibre Channel adapter is in place and that the media RANKs are visible as iSCSI targets.

Note: The iSCSI adapters on this server must be on a different subnet than those on its redundant server partner.

Select Backup.
Select an iSCSI adapter and do the following:
1. Click Modify. A network configuration dialog box opens.
2. Verify or enter the media network IP address and the subnet mask.
3. Click Apply.
4. Click View Target Drives.
5. Verify that all drives are shown in the Drives exposed as iSCSI targets field.
Repeat the previous step for the other iSCSI adapters.
Click Check. The Validation Report opens.
Confirm that the iSCSI configuration is successful.
Close the Validation Report.
Click Next.

The Database Server Configuration page opens.