Other Topic Library Versions

Making CMOS settings

Note: This procedure is intended for use by Grass Valley Service personnel or under the direct supervision of Grass Valley Service personnel.
  1. Connect keyboard, monitor, and mouse to the K2 Summit system.
  2. Restart the K2 Summit system.
  3. During the BIOS startup screen, watch the keyboard lights (capslock, numlock, etc.). When the lights flash, press Delete to enter Setup.
  4. Press F3 and then press Enter. This loads optimal default values for all the setup questions.
  5. Press F4 and then press Enter to save settings and restart.

Copyright © 2016 Grass Valley Canada. All rights reserved. K2 Summit 9.6 gvtp_20160520_13:06:36