Other Topic Library Versions

Restoring settings after generic reimage

Settings must be saved using ssave.bat before reimaging the K2 Summit system, and the reimage (Acronis) process must be complete.

  1. If you have not already done so, start up the K2 Summit system and log on with administrator privileges.
  2. Connect the USB Recovery Flash Drive to a USB port on the K2 Summit system.
  3. From the USB Recovery Flash Drive, run the following and wait for the process to complete:

    Tools\SaveRestoreScripts\srestore.bat

Next, do the following as appropriate to restore your K2 Summit system. Refer to related topics in this document or as otherwise indicated.
  1. Restore network configuration. If you saved settings with ssave.bat, refer to C:\ipconfig.txt for the complete listing of the network settings that the K2 Summit system had before reimaging.
  2. Enhance network bandwidth.
  3. Install the SiteConfig Discovery Agent.
  4. If you install software with SiteConfig, do the following:
    • Take Embedded Security out of Update mode.
    • Install SNFS software and K2 software using SiteConfig.
    • Restore SabreTooth licenses.
  5. If you install software manually (without SiteConfig), do the following:
    • Install SNFS software and K2 software manually.
    • Take Embedded Security out of Update mode.
    • Restore SabreTooth licenses.

    If you saved/restored settings with ssave.bat and srestore.bat, SNFS uses the restored settings. Refer to related topics in the "About This Release" section of the K2 Topic Library.

  6. If a K2 Summit system with direct-connect storage or shared storage on a redundant K2 SAN, install MPIO software.
  7. If a K2 Summit system with a Fibre Channel card, install the Fibre Channel Card driver. Refer to related topics in "K2 Summit Production Client Service Manual".
  8. If a K2 Summit SAN-attached system, on the K2 SAN’s control point PC, use the K2Config application to add the K2 Summit system back to the SAN
  9. Check the Windows operating system clock, and if necessary, set it to the correct time.
  10. Activate Windows within 30 days.

Copyright © 2016 Grass Valley Canada. All rights reserved. K2 Summit 9.6 gvtp_20160520_13:06:36