Other Topic Library Versions

Adding a generic client device

  • You must be logged in to the K2Config application with permissions equivalent to K2 administrator or higher.
  • The devices of the K2 SAN are not required to be offline, and a restart of devices is not required.
  1. In SiteConfig, add the client device to the appropriate group and verify that it is communicating correctly on networks.
  2. In the K2Config application tree view, select the name of the K2 SAN, which is the top node of the storage system tree.
  3. Click Add Device. The Add Device dialog box opens.
  4. Select the type of client you are adding.
  5. Click OK. The new client appears in the tree view.
  6. Configure the client as appropriate. Refer to the documentation for the device. Enter the RVIO value as provided by Grass Valley. Do not attempt to calculate the RVIO value on your own. When configuring editors on a K2 SAN with 1 Gig TOEs, do not assign editors and K2 clients (K2 Summit or K2 Media Client) to the same TOE. Instead, assign editors to their own TOE.

Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170317_08:51:20