Other Topic Library Versions

Configure File System Server Configuration page - Basic K2 SAN

  • Network and SNMP must be settings configured
  • Disks must be bound
  • A new file system must be made



This page checks on the configuration of the K2 Media Server in one of its main roles as a file system server. The K2 Media Server also functions as a file system client, which is also checked from this page.

  1. In K2Config open the server's File System Server Configuration page, if the page is not already open.
  2. If desired, configure reference file generation.
  3. Click Check.
  4. When the wizard reports that the configuration is correct, click Next. If you get a “The V: will not be available until this device is rebooted…” message, you can safely continue now and reboot later when instructed to do so.

The iSCSI Bridge Server Configuration page opens.


Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170317_08:51:20