Other Topic Library Versions

Step 3: Check system status messages

While the K2 Summit system is in operation, some problems are detected and reported in system status messages. To view system status messages, in AppCenter select Help | System Status.

When connecting to a K2 Summit system from a control point PC using remote AppCenter, if there is an AppCenter system startup error, the error is reported during the connection attempt.

If the system status message indicates a problem, refer to related topics in "K2 Summit Production Client Service Manual".

Note: Do not use the MegaRAID utility on a K2 Summit system. This utility is for use by qualified Grass Valley Service personnel only. When this utility is opened it scans the SCSI bus and interferes with record and play operations.

Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170317_08:51:20