Other Topic Library Versions

Install the NEC M110 shared storage into the threaded rail rack

Follow this procedure to install the M110 chassis into the 19 inch 10-32 threaded rail rack.

  1. Read the stickers on the rack slide from NEC. Use the "T" bracket for the 19 inch 10-32 threaded rail rack. Use the bracket for both the left and right rack slides.

  2. Loosen the screws to allow the rack slide to expand to the proper depth of the threaded rails.
  3. Attach the "T" bracket to the rack slide and the rack bracket.

  4. Sandwich the 10-32 threaded rail both in the front and back of the rack.

  5. Tighten the screws used to expand the rail to the proper depth.

  6. Install the 10-32 screws into the front and back of the rack slide. Use the bottom screw hole of the top rack unit and the middle screw hole of the bottom rack unit.


Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170117_17:59:42