Other Topic Library Versions

Modifying a media (iSCSI) network

  1. In the Network Configuration | Networks tree view, select the K2 SAN's Site node. The networks under that node are displayed in the list view.
  2. Proceed as follows:
    • If the K2 SAN is basic (non-redundant), in the list view, right-click the iSCSI network and select Details.
    • If the K2 SAN is redundant, in the list view, first right-click the primary iSCSI network and select Details. Then proceed to modify the primary iSCSI network. After the primary iSCSI network is modified, repeat these steps and modify the secondary iSCSI network.

    The Network Settings dialog box opens.



  3. Configure the settings for the network as follows:
    Setting... For media (iSCSI) network
    Type Ethernet is required
    Usage StorageNetworking is required
    Redundancy None is required for a basic (non-redundant) K2 SAN
    Primary is required for a redundant K2 SAN media network A
    Secondary is required for a redundant K2 SAN media network B
    Name iSCSI (non-Redundant) is recommended for a basic (non-redundant) K2 SAN
    iSCSI (Primary Redundant) is recommended for a redundant K2 SAN media network A
    iSCSI (Secondary Redundant) is recommended for a redundant K2 SAN media network B
    Exclude from Host Files Selected is required
    Managed Selected is required
    Base IP Address The first (lowest) IP address in the range of IP addresses managed by SiteConfig. Required.
    Number of Addresses The number of IP addresses in the range managed by SiteConfig. Required.
    Subnet Mask The network's subnet mask. Required.
    Gateway IP Address Not allowed
    Unmanaged Unselected is required. Related settings are disabled.
    DNS Servers Not allowed
    Default Interface Name Suffix Not allowed
  4. Click OK to save settings and close.

Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170117_17:59:42