Other Topic Library Versions

Setting up Windows

If a system is restored using the factory-default generic disk image or otherwise has the Windows operating system re-applied, a Windows set up process is required.

  1. Upon first startup after reimage, a Windows Setup Wizard automatically opens. Work through the wizard as follows:
    1. Enter in the Windows Product Key and click Next. The Product Key is on a sticker on the top of the machine near the front right corner.
    2. Enter the name of the machine. To restore the factory-default name, enter the Serial Number (located at the right side and rear). The password is pre-set to the factory default. Leave the password as is.
    3. Click Next.
    4. Set Time and click Next.
    Windows loads components and restarts the K2 Media Server.
  2. Upon restart, log in to Windows.
  3. Rename the machine and set Windows clock as necessary.

Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170117_17:59:42