Other Topic Library Versions

Uninstalling Multi-Path I/O Software on a direct-connect K2 system

The following procedure applies to direct-connect K2 systems.

The files for the Multi-Path I/O software are copied on to the K2 system when the K2 software is installed.

  1. Access the Windows desktop on the K2 system. You can do this locally with a connected keyboard, mouse, and monitor or remotely via the Windows Remote Desktop Connection.
  2. Stop all media access. If AppCenter is open, close it.
  3. Click Start | Run, type cmd and press Enter. The MS-DOS command prompt window opens.
  4. From the command prompt, navigate to the C:\profile\mpio directory.
  5. Type one of the following at the command prompt:
    • If uninstalling on a 32-bit system:

      gdsminstall.exe -u c:\profile\mpio gdsm.inf Root\GDSM

    • If uninstalling on a 64-bit system:

      gdsminstall64.exe -u

  6. Press Enter. The software is uninstalled. The command prompt window reports progress.
  7. Restart the K2 system.

Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170117_17:59:42