Other Topic Library Versions

About Multi-Cam

This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite license. Three inputs requires 3-input Multi-Cam license. Two inputs included in AppCenter Elite license.

You can connect up to three video sources to SDI IN1, SDI IN2, and SDI IN3 in a channel. You must configure the channel as a Multi-Cam record channel. The K2 Summit/Solo system records up to three clips, one from each video input, and automatically gives them default names.

If ancillary data and/or timecode is present on SDI IN1, each Multi-Cam clip contains that ancillary data and/or timecode. LTC timecode is also shared for all clips.

The K2 Summit/Solo system can record the same audio for all clips, or it can record separate audio for each clip. You can configure these audio options as desired.

In E-to-E (LoopThru) mode, SDI OUT1 and SDI OUT2 show the signal coming in at SDI IN1, SDI IN2, and SDI IN3 respectively. When in this mode, the VGA Video Monitor displays up to three inputs, but at a smaller size, in the area for the single channel.

Each Multi-Cam clip plays as a standard clip on a standard bi-directional record/play channel.

Each audio meter is represented for each audio input. You must have a high resolution monitor (720p or 1080i) to view all of the audio meters for 3x Multi-Cam record.


Copyright © 2017 Grass Valley Canada. All rights reserved. K2 Summit 9.7 gvtp_20170117_17:59:42