Other Topic Library Versions

Mapping audio channels

In AppCenter Pro and Elite versions, there is support for up to 64 tracks of audio for an existing clip. In addition to existing language labels, you can specify a track number in the form A# where # is a number from 1 to the last track number ("A64"). This allows you to map the audio track to a specific track index rather than a language tag. If you want to map all 64 tracks, you must gang them in four 16 channel groups. If a clips has less than 32 audio tracks, then audio tracks 33 through 64 repeat. Note: Do not label your audio track Axx (where xx is numbered 1-64). These names are reserved for mapping only.

  1. In the Channel tab of the Configuration Manager, scroll down to the Audio Output section. The sections are grouped into 16 channels under each channel tab (C1-C4).
  2. Select <Add Tags...>.
    • Enter a name in the Primary or Secondary audio output track, or check the Play silence options. Continue to enter names for up to 64 audio tracks. Note that the first Primary Audio Output tag name appears in the Audio Output Tags in the Configuration Channel tab.
  3. If you want to map all 64 audio tracks, you must gang them in four 16 channel groups: Ch 1: tracks 1-16, Ch 2: tracks 17-32, Ch 3: tracks 33-48 and Ch 4: tracks 49-64.
  4. To have the changes apply to this configuration file, click OK.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01