Other Topic Library Versions

Configuring a record channel for IP redundancy

  1. From AppCenter, select System>Configuration to access the Configuration Manager settings.
  2. Select the System tab to verify that the video reference is present and locked. See the "Configuring video reference standard settings" topic for more information. The K2 Summit's SMPTE 2022-6 implementation requires the use of synchronous media streams.
  3. Configure a channel for Player/Recorder mode. This procedure will use C1 for this example.
  4. Since C1 will be used to record a clip with IP Redundancy enabled, C2 must also be configured for Player/Recorder mode.
  5. Configure C1 for the desired Video Input Format and other settings.
  6. Change C1's Input Type setting to 10GigE.
  7. Use C1's IP I/O Configuration pop-up menu to configure the Receiver 1 IP Address to match the desired SMPTE 2022-6 stream configuration.
  8. Use C2's IP I/O Configuration pop-up menu to configure the Receiver 3 IP Address to match the desired SMPTE 2022-6 stream configuration.
  9. Using either C1 or C2, change the IP Redundancy setting to Yes.
  10. Press OK to close the configuration menu and apply the settings.
  11. Enable E-to-E mode for C1, if desired.
  12. Start recording using C1 when desired.
  13. While channel C1 is in use this way, a similar process can be used to play or record a clip with IP Redundancy using channel C2.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01